 |
 |
  |
(800) 339-9140 or (919)303-2525 CERTIFIED PLUS HOME INSPECTIONS Raleigh, North Carolina Home Inspection Company Serving the Greater Triangle Area MONEY BACK GUARANTEE! Prices Start at $199 Raleigh North Carolina Licensed Home Inspector #2173
|
RALEIGH NC HOME INSPECTION PRICES STARTING AT $199 FOR A NORTH CAROLINA HOME INSPECTION BY A STATE CERTIFIED NC HOME INSPECTOR. STATE OF NORTH CAROLINA / NC LICENSED ASHI, NACHI CERTIFIED, NORTH CAROLINA INSPECTORS, HOME INSPECTION SERVICES FOR ALAMANCE, CHATHAM, JOHNSTON, LEE, ORANGE, WAKE. TOWNS AND SURROUNDING AREAS CHAPEL HILL, HILLSBOROUGH, RALEIGH, NC, APEX, NC, DURHAM, NC, CARY, NC COUNTIES.
|
|
10 DO IT YOURSELF MAINTENANCE AND REPAIR
TIPS
SAVE THOUSANDS OF DOLLARS BY AVOIDING MAJOR
REPAIRS!

By Gerald Warren
Gerald Warren is the owner of Certified Plus Home Inspections
in Apex, North Carolina. Gerald is a licensed
home inspector
in the two states of North Carolina and New Jersey and has
been in real estate for over thirty years. Besides the home
inspection business, Gerald worked as a licensed real estate
associate and a licensed real estate appraiser and is
proficient in both fields. Gerald is a member of the two
prestigious home inspector organizations, ASHI (American
Society of Home Inspectors) and NACHI (National Association of
Certified Home Inspectors).
The following article is about 10 very common maintenance or
repair problems that are encountered by a residential home
owner. I would venture to say that even if you’re just a
little bit handy, all ten items can be handled by the average
homeowner and will save thousands of dollars.
1. Main water valve location and identification
2. Repair doors that stick
3.
Tub and shower caulking
4. Washing machine hose leaks
5.
Concrete front step crack problems
6.
Hot water heater problems
7.
Gutter and downspout water control
8.
Cloths dryer vent duct cleaning
9. Water flood alarm for 10 dollars
10. Door bell replacement, made easy
11.
Suggested tools for homeowners
|
A CERTIFIED PLUS HOME INSPECTION INCLUDES:
 | PRICES - START AT $199 - The price is set according to the size of the house. Call for exact prices for your North Carolina real estate home inspection. |  | REPORT - ON SITE SUMMARY REPORT - At the end of the home inspection, you will receive a summary report of the repairs. You are now ready to negotiate any repairs right after the inspection. |  |
MONEY BACK GUARANTEE - Our home inspectors are professionals. We are one of the few companies that offer a money back guarantee. If you are not satisfied with our home inspection, we will gladly refund your money. |  | APPLIANCES - All appliances that are purchased with the house will be tested at no extra charge. Appliances such as the dishwasher, stove, refrigerator and the washer and dryer. |
|
MAIN WATER VALVE
Main water valve location and identification - One of the most
important things to know about your house is where to shut off
the water when there is a water problem. Every member of the
household should know where the main valve is and how to shut
it off in case of an emergency. Another important point is
that the valve should turn easily so that even a very young
person could turn the water off. It is also recommended that a
tag be put on the main valve so that it is easily recognized
as such. Many times people know where the valve is located
but, when a water problem develops, they don’t remember which
valve is the main valve. The tag will identify the valve and
could save thousands of dollars by keeping water damage to a
minimum.
REPAIR DOORS THAT STICK
Repair doors that stick and/or rub - Doors that rub against
the door frame often cause the door to stick. Many interior
doors and door frames swell with humidity and start to rub and
stick. This is different from a door that is completely out of
square due to a structural problem. Most rubbing and sticking
problems come from one of two causes:
One - The hinges are loose and need to be tightened to pull
the door back into the proper position.
Two - The door and frame swell in the summer and close
perfectly in the winter.
A simple door sticking situation is repaired as follows:
(1) Check the hinges to make sure they are tight and
supporting the door properly. If the hinges are loose most
likely the hinges are the reason why the door is rubbing and
sticking. If this is the case, tighten the screws. If the
screws won’t tighten, try an old time carpenter’s trick to
tighten loose screws. First, support the door and take off the
loose hinge screws. Next insert toothpicks into the screw hole
or holes with a dab of glue. Allow 20 minutes for the glue to
dry and then reinsert the screws. You’ll be amazed at how
tight the toothpicks have made the screws.
(2) If the hinges are tight but the door is rubbing, the door
needs to be trimmed. An inexpensive tool can be bought to do
the job. The tool is called a block planer hand rasp. The cost
is probably under $10 and can be purchased in Lowe’s, or Home
Depot, or a local hardware store. It looks like a small hand
held flat cheese grater. This quick repair is done with the
door in place. There is no need to remove the door. Mark the
door with a pencil where the door is rubbing the frame. Now
that the spot is marked, you can proceed to plane the area on
the side of the door that is sticking until the door closes
properly. This type of repair usually only takes a few minutes
and very little material has to be removed from the area that
sticks. If you have to remove a lot of material to make the
door close, it would probably be better to have a professional
carpenter evaluate the door problem.
TUB AND SHOWER CAULKING
Caulking around tub and shower - One job every home owner
should learn to do is to caulk around the tub and shower. It’s
a job that has to be done every couple of years and it’s a job
that is a must to avoid water damage. Whether you are caulking
a tub or shower the hardest part of the whole job is cleaning
out the old caulk. For the purpose of this article, the
following steps are a good guide as to how to caulk that tub
or shower and have it look like a professional job.
(1) Remove the old caulk with a scrapper or razor blade and
then clean the area with any good household cleaner. It is
very important to have the caulking area squeaky clean. The
caulk won’t adhere to a dirty surface.
(2) Now wipe down the squeaky clean area with denatured
alcohol before applying the new caulk. The alcohol does a good
job of removing any soap or chemical residue allowing the
caulk to really adhere to the surface and seal it.
(3) The type of caulk used is important. It should be "a water
clean up caulk." Look for caulk that reads Water Clean-up for
Bathrooms. There are 2 types and either will do the job: the
squeeze tube caulk or the caulk that has to be used with a
three dollar sealant application gun.
(4) The secret of having the job look like a professional
installation is in the way excess caulk is removed. After the
caulk is applied and it is still wet, use a small wet sponge
to wipe down the caulk. Rinse the sponge frequently in a
bucket of warm water. The sponge will push the caulk into any
small cracks and spaces and the finish bead will look great.
(5) Let the caulk dry for 24 hours before using the tub or
shower and then call all your friends to come over and see the
great job you did. Be sure to take pictures!
WASHING MACHINE HOSES
Leaks from washing machine hoses - One of the leading causes
of residential water damage is the failure of a washing
machine rubber hose. Typically a standard rubber hose has a
life expectance of 3 to 5 years. However, there are some very
good upgrade hoses that will minimize or eliminate any water
damage caused by worn rubber hoses. The installation of the
hose is easy and the job could be done in just a few minutes.
The most common replacement hose which is much safer than the
rubber hose is the stainless steel braided hose. This type of
hose can be purchased at any large hardware store and is
stronger and safer than a rubber hose against a sudden hose
rupture.
class=Section2>
Another hose that is very reliable is the Floodchek hose which
comes with a 20 year guarantee. The braided hoses are about
$30 and the Floodchek hose costs about $50. The upgrade of
washing machine hoses is well worth the effort to avoid water
problems and have peace of mind.
More information about the Floodchek washing machine hose can
be found on the Internet at
http://www.shop.com/FloodChek_Hoses_(One_Pair,_5_ft_)-35275053-p!.shtml
CONCRETE FRONT STEP CRACK PROBLEMS
Crack problems in concrete front steps - Concrete and stone
steps are notorious for cracking where the handrail is mounted
into the step. It appears as if the hole where the hand rail
is mounted into the steps is not filled with concrete to the
top of the step. This allows water to get into the hole. When
the cold weather arrives, the water freezes in the hole and
the step cracks. Additional water then gets into that crack,
the water freezes, and the entire corner of the step breaks
off. As a maintenance precaution against getting a cracked
step, we suggest filling any unfilled holes around a handrail
mounting with Vinyl Concrete Patcher, made by Quikrete. You
can also use this product to fill in cracks that may already
be in the step and hopefully avoid further damage. This is an
easy product to use, just add water, mix, and apply with a
putty knife.
HOT WATER HEATER PROBLEMS
Aging hot water heaters - Most water heaters last 10 to 12
years. Wet spots on the floor or a rusted tank may signal a
problem. Other signs that the hot water heater is at the end
of life is when the water smells like rotten eggs or, when the
heater is creating hot water, it sounds like there are marbles
rolling around inside the tank. When any of these signs are
noted, the tank is usually between 10 and 15 years old and
ready for replacement. It is best to replace a heater before
it leaks and avoid any water damage. We have two other
suggestions about hot water tanks:
One - If you are not in a financial position to buy a new
tank, buy a "watchdog water alarm" and place it at the base of
the heater to warn you if a leak develops. When the alarm
sounds as a warning signal, hopefully the water can be turned
off in time to minimize any water damage. The alarm is very
inexpensive at a cost of about $10 in Lowe’s or Home Depot.
Two - If you are installing a new heater install a catch pan
under the heater, if possible, with a drain line to the
exterior of the house. If a leak develops and you have a catch
pan and drain, the water will be diverted and discharged to
the exterior. Plastic drain pans cost about $10.
GUTTER AND DOWNSPOUT WATER CONTROL
Gutter down spout extensions - The number one culprit for
causing water penetration into the basement of a house is rain
gutter downspouts discharging rain water right alongside the
foundation. All downspouts should discharge the water at least
five feet or more from the foundation. If a downspout is
discharging water right alongside the foundation, we recommend
installing downspout extensions. That is an easy job that most
people can do themselves. Getting the water away from the
foundation will help to avoid water penetration into the
basement. Close-to-the-house downspout discharge is not the
problem of all water problems in the basement, but it is
certainly one of the major ones. If a water penetration
problem develops in the basement, before you call in a
waterproofing contractor, check the downspout discharge area.
As already mentioned the correction may be as simple as
installing extensions on the downspouts and discharging the
water away from the house. One other tip on water penetration
and downspout discharge, if your downspout discharges to an
under ground discharge pipe and you are getting water
penetration in the downspout area, you may have a damaged
underground discharge pipe. That pipe may be discharging water
right alongside the foundation causing the water intrusion. To
determine whether or not the in-ground pipe is damaged and
causing the problem, disconnect the downspout from the
in-ground pipe and put a five foot extension on the downspout.
This will allow the water discharge to occur above the ground.
If the water penetration into the basement stops, is will be
evident that the broken in-ground pipe line is the problem. If
that’s the case, you can either dig up and repair the pipe or
just stay with the above ground discharge extension.
CLOTHES DRYER VENT MAINTENANCE
Maintaining clothes dryer vents - Most clothes dryer vent
ducts are of short length and can be cleaned by the home
owner. However, there are some long runs of twenty feet or
more that may run in crawl spaces or in non-floored attics. It
is recommended that these type ducts be cleaned by a
professional with special duct cleaning equipment.
Tell-tale signs that the vent needs cleaning:
-
Clothes are still damp at the end of a normal cycle.
-
Clothes are hotter than usual at the end of the cycle.
-
Clothes have a musty smell after drying.
-
There is a great deal of lint escaping from the back of the
dryer.
-
The flapper on the vent exhaust hood doesn’t open when the
dryer is running or there is a lot of lint covering the vent
exhaust hood.
-
Dryer operation and maintenance tips:
-
Clean the lint filter before and after every drying cycle.
-
Replace a vinyl duct with a ridge or flexible metal duct.
The metal duct creates less lint buildup at the bends and is a
safer duct.
-
For safety reasons, never leave
the dryer running when you leave the house or go to bed.
-
Cleaning the vent duct if you have a short length duct – A
short length duct is one which goes from the back of the dryer
directly through the wall of the house to the exterior. The
hardest part of the cleaning job is pulling the dryer out from
the wall to disconnect the duct.
Note - Always turn off the gas valve before working on the
dryer. Be careful not to damage the flexible gas line when
pulling the dryer out from the wall. Sometimes it may be
necessary to turn off the gas by using the small valve at the
dryer gas line. Then you can disconnect the gas line and pull
the dryer away from the wall safely to disconnect the vent
duct. Once the duct is disconnected, we recommend taking the
duct outside so lint is not spread all over. To clean the
duct, use a shop vacuum or a regular house vacuum and vacuum
the duct out from each end. If you don’t have a vacuum, tie a
toilet brush to a rope and pull it through the vent. This
method is called “the handy-man special,” and does a pretty
good job. Next check the back section of the dryer for lint
buildup and check the vent discharge cap and flapper for lint
buildup and blockage. The vent doesn’t have to be squeaky
clean, just clean enough for good air flow. After the dryer is
back in place and functional, you can announce “We just saved
a hundred dollars by cleaning the dryer vent ourselves.”
TEN DOLLAR WATER ALARM
Watchdog water alarm - If you have a water problem in certain
areas, a ten dollar water alarm in the area can avoid a
serious water damage problem by giving an early warning. Areas
such as washing machines, hot water heaters, sump pumps or any
other areas that are prone to develop water problems are
perfect for these little gadgets. These little alarms are
great and can be purchased at Lowe’s or Home Depot.
REPLACE DOORBELL
Replacing the doorbell - There are two easy fixes if you have
a doorbell that is missing or destroyed, or you’re just plain
tired of fixing the doorbell. The first door bell solution is
to install a door knocker and be done with the doorbell. The
second solution is to install a wireless doorbell that is run
by battery. Both solutions are “Do-it-yourself solutions.”
Call 919-303-2525 for more information. All About Home Inspections from A to Z - National Association of Certified Home Inspectors
Triangle area towns -Raleigh, Durham, Chapel Hill, Cary, Hillsborough, Carrboro, Apex, Holly Springs, Garner, Fuquay-Varina, Morrisville, North Carolina, all home inspections will be conducted to the American Society of Home Inspectors standards (ASHI ). All inspections will be conducted by a licensed, certified, insured professional NC home inspectors - Raleigh, NC. In North Carolina, all home inspections will be conducted to the American Society of Home Inspectors standards (ASHI ). All inspections will be conducted by licensed, certified, insured, professional NC home inspectors. Licensed North Carolina Home Inspectors serving: Alamance County, Chatham County, Johnston County, Lee County, Orange County, Wake County, towns and surrounding areas for Apex, Cary, Chapel Hill, Durham, Hillsborough, Raleigh, Carrboro, Holly Springs, Garner, Morrisville, Fuquay-Varina. Licensed North Carolina Home Inspector Serving: Licensed North Carolina Home Inspector Serving: Alamance County, Chatham County, Johnston County, Lee County, Orange County, Wake County. Towns and surrounding areas for Apex, Cary, Chapel Hill, Durham, Hillsborough, and Raleigh.
|